Build#1 Ecto-1
We here at Projects In Progress do Specialize in
scale vehicle building all the time. We build them
just like what the TV series or movies did.
We started out with a Newer Re-issued 1/24 Snap kit
for this build. But here at PIP we do custom builds.
This little 1/24 scale has a lot of detail planed for in it. Alot of
parts will be retooled and parts will be scratch built as while.
Here the window trim and molding stuff continues.
Here is the Pass Side
that was corrected.
Here is the Driver side
Still being work on.
The yellow you see is a piece of scrap sign glued in the back side
of the shell for support. The white is square Evergreen stock
slightly bent to conture. To the exterior to get the correct look
of the rear door window frame.
Here is the Pass side view that was work on.
Here is the Driver side view that is being worked on.
Here is the Driver side whole view before work.
Here is the Driver side with the markings where the white
square stock will be place at. These are mirror from the other
side of the shell.
Now you can see what the correct side looks like and
what the Drivers side will look like as while once finish.
Now getting back to the Drivers side. As things are marked
out and PIP gets ready for the next step and stage of the build
process.
Now the white square stock has been made and put into place.
You can see the scale shell starting to take shape and coming
togother here. Plus you can see one piece starting to be made
to curve around the back of the Ecto.
